 Industrial Speednamel is a high gloss, heavy duty, synthetic
enamel designed for use on neon signs, backgrounds, trucks, steel structures
and other surfaces where a superior, quick drying enamel is required. The
tough, flexible, brilliant finish resists oils, grease, moisture, cold, heat,
aliphatic solvents etc. making it ideal for use on machinery, equipment, walls,
steel work in factories and plants or wherever a durable, high gloss coating is
required. Ideal for use on equipment and rides in carnivals and amusement
parks. Available in 22 lead free colors. Dry Time: @ 70 F; 50%
Relative Humidity: Dries to touch - 30 minutes to 2 hours; to handle - 2 to 4
hours; to recoat - 6 to 8 hours. Full cure - 7 days. May take longer to dry
under humid conditions. Application Methods: Brush, roller or spray.
 Ron-Tech DTM Industrial Enamel is a
unique waterborne, corrosion resistant, 100% acrylic gloss enamel formulated to
provide direct-to-metal application. It is designed for use as a maintenance
coating on properly prepared metal, wood, masonite, concrete and masonry
surfaces. Ron-Tech DTM Industrial Enamel dries to a durable, flexible, weather
resistant gloss finish. Exhibits excellent adhesion on difficult to adhere to
metal surfaces, wood, masonite, concrete and masonry surfaces. Provides
improved color retention, gloss retention, and chalk resistance when compared
to alkyd industrial enamels. Water based, corrosion resistant, lead and
chromate free, fast drying, low odor, easy brushing, VOC compliant, easy
clean-up with water. Dry Time: @ 70 F. and 50% Relative Humidity:
Dries to touch - 30 minutes; to handle - 2 hours; to recoat - 4 hours. Will
take longer to dry under colder or more humid conditions. Application
Methods: Brush, roller or spray.
 Ultra-Seal Gloss is a two component (mixing ratio - 3:1)
aliphatic acrylic polyurethane coating system that is highly resistant to
graffiti, abrasion, wet conditions, corrosive fumes and chemical contact. When
fully cured, it exhibits outstanding retention of initial gloss on long-term
weather exposure. It is also highly resistant to the chemicals used in graffiti
removal that allows graffiti to be removed without damaging the finish.
Recommended for coating steel tank exteriors, equipment and structures,
galvanized steel, non-ferrous metals, concrete, wood and masonry in highly
corrosive or graffiti prone environments. Curing Time: @ 70 F. and
50% Relative Humidity: Dries to touch - 2 1/4 hours; to handle - 10 hours; to
recoat - 16 to 20 hours; full graffiti resistance - 7 days. Application
Methods: Brush, roller or spray.
 Aqua-Shield is a two-component (mixing ratio - 1:1) waterborne
epoxy coating designed to give performance equal to a solvent based epoxy
system. Completely cured, Aqua-Shield provides a tile-like, gloss finish that
is hard, durable, highly chemical and abrasion resistant. It is also resistant
to oil, grease, gasoline, alkali, water and splashes from solvents and weak
acids. Non-flammable, non-toxic when cured, low odor, Aqua-Shield can be used
in areas that don't allow for use of solvent based epoxies. Can be used over
conventional finishes without lifting. Recommended for all wood, metal,
concrete, aluminum, masonry surfaces. Galvanized metal, Fiberglas and many
synthetics. Some suggested applications are material handling equipment, metal
and wood cabinets, doors, stairwells and steps, hallways, office furniture and
fixtures, basements, washrooms, appliances, shop furniture and tile. Excellent
for use in hospitals, veterinary clinics, commercial buildings, warehouses, car
dealerships, and garages. Curing Time: @ 70 F. and 50% Relative
Humidity: Dries to touch: 4 1/2 hours. Allow overnight dry before recoating.
Light walk on traffic after 24 hours. Full cure in 7 days. May take longer
under humid conditions. Application Methods: Brush or roller.
 Super Coat is a two component (mixing
ratio - 3:1) epoxy modified polyamide, high performance coating that provides a
tough, durable, protective top coat that resists chemicals, abrasion, water and
weather. It resists many common acids, alkalis, chemical, solvents, gasoline
and fumes. Recommended for swimming pools, lining of storage tanks, surfaces in
marine environments, floors in commercial garages, shower rooms, locker rooms,
concession stands, equipment, fences, decks, cabana floors etc. Curing
Time: @ 70 F. and 50% Relative Humidity: Dries to touch - 3 hours; to
handle - 10 hours; to recoat - 16 to 20 hours. Application Methods:
Brush, roller or spray.
Silver-Brite
Aluminum is an interior/exterior leafing aluminum paint with high
reflectivity. Fortified with hydrocarbon resins for overall durability and
industrial applications. For use on properly primed structural steel, wood,
masonry, chain link fences, tanks etc. Dry Time: @ 70 F; 50%
Relative Humidity: Dries to touch - 3 hours; to handle - 4 hours; to recoat -
12 hours. Full cure - 7 days. May take longer to dry under humid conditions.
 Ronan Elastomeric Coating is a 100%
water-based, acrylic latex coating that is designed to provide a durable,
flexible, reflective, protective, waterproof coating over various substrates;
such as, exterior concrete, block, masonry and stucco walls. Can also be used
on conventional bituminous built-up roofs, polyurethane foam, galvanized steel,
wood and asphalt roof shingles. Ronan Elastomeric Coating differs from paint
because it expands and contracts along with the substrate to which it is
applied. It will not rupture due to its elongation properties. It is ideal for
bridging hairline cracks that expand or contract during temperature changes.
Drying Time: @ 70 F; 50% Relative Humidity: Dries to touch - 6 to 8
hours; to recoat - 24 hours. May take longer to dry under humid conditions.
|